User`s manual

58
ARS-2030LD/2032D/2034D
4.12.4 Format HDD
On the above figure press ESC and ▼ to enter the following figure. Format HDD is
to partition the hard disk. But before formatting, all data on the hard disk will be
deleted.
12-04. Adv Setup
Format HDD
If your copy smart plus doesn’t connect with a hard disk, LCD will show the message
as follows.
There is no HDD!
4.12.5 Verify HDD
On the above figure press ESC to return to Function 12, and then select part 5 Verify
HDD as the following figure shows. Verify HDD is to verify if the hard disk or any
of its partitions can work well.
12-05. Adv Setup
Verify HDD
Press ENT to get the next figure. In DVD a partition occupies 5GB while in CD
1GB.
HD Partition
FormatSelect? DVD