User`s manual

13
ARS-2030LD/2032D/2034D
3. 4.
Detect Drives
1. Copy
3.2 About HDD Installation
HDD installation is not necessary, but with a hard disk you can use and enjoy the
function of Image. In other words, you have one more choice to reproduce a DVD
from an image file stored in the hard disk. In subsection 3.2.1 and 3.2.2 we are going
to describe the differences of installing a 3.5” hard disk and not installing.
3.2.1 With a HDD
If you install a 3.5” hard disk to your copy smart plus, the operation procedures will
be as follows.
l Once your copy smart plus detects the hard disk, it will ask if you want to
format or not. A 10GB hard disk can be divided into 2 partitions. Each
partition has 5GB capacity.
l Use function 8 Select Source to set the hard disk as the source.
l In function 9 Image select a partition to store the data.
l If there is no data in a selected partition, place a source DVD into DVD-
ROM and use function 9-01 Load to transmit data from DVD into the selected
partition by pressing ENT. Different data can be stored in different partitions.
There are 12 functions for you to use. Function 1 is Copy. You can press ▼ to select
other functions.
l Switch to function 1 Copy by pressing ▲ . Place blank DVD disks into
the DVD writers, and press ENT to start copying.