User`s manual

48
ARS-2021D/2021DS Manual
When burning finishes, LCD will show the results as follows.
Burn Complete !
OK: 01
On the above figure press ESC to enter the following figure. Now press ▼ to move
the data from HDD template into a certain partition.
Burn or Move to
partition? Move
After pressing ▼, you need to select a partition into which the data will be moved.
Suppose we select A as shown below.
Select Partition
A
After pressing ENT, LCD will show the moving information as follows.
Moving to P: A
0%
When moving finishes, LCD will show the results as follows.
Moving to P: A
OK!