User`s manual

22
ARS-2021D/2021DS Manual
l Switch to function 1 Copy by pressing ▲ . Place a blank DVD disk into
the DVD writer, and press ENT to start copying.
l When copying comes to an end, the passed DVD will eject automatically.
The default is eject automatically, but you can change it.
l The failed DVD will remain in the writer. The default is keeping a failed
DVD in the writer, but you can change it. To take the failed DVD you need
to press the button on the writer.
l During operation do not press any button on ARS-2021D/2021DS, because
interruption will harm the device, and DVD will be damaged.
3.2.2 Without a HDD
If you don’t install a 2.5” hard disk to your ARS-2021D/2021DS, the operation
procedures will be as follows.
l Place a source DVD into DVD-ROM.
l Switch to function 1 Copy by pressing ▲ . Place a blank DVD disk into
the DVD writer, and press ENT to start copying.
l When copying comes to an end, the passed DVD will eject automatically.
The default is eject automatically, but you can change it.
l The failed DVD will remain in the writer. The default is keeping a failed
DVD in the writer, but you can change it. To take the failed DVD you need
to press the “eject” button on the writer.