User`s manual

AEC-67160M Ultra160 SCSI Adapter

3.2 Mac OS 10.1 installation

1. Be sure your hardware had install correctly.

2. Insert Mac OS X CD-ROM to your Macintosh.

3. Power on your Macintosh and press ‘C’ key.

4. After Mac OS X Boot up, select “Installer” from the top selection tools.

5. Select “Open Disk Utility ...” to open it.

6. Click on “Drive Setup” and choose the hard drive that you want to

initialize.

7. Select the hard drive which you want to initialize and choose

“Partition” to select the number of partition that you want to be.