User`s manual

7
ARS-2016/2016E Manual
2.3 Quick Start
The following 8 steps are for ARS-2016.
Step 1: Make sure that all cables are connected firmly to your PC.
Step 2: Take the cabinet out of the Mirror Smart 160.
Step 3: Put a hard drive into the cabinet and connect it with the internal cable.
Step 4: Replace the cabinet to the Mirror Smart 160.
Step 5: Make sure that the auto-eject handle on the cabinet is closed.
Step 6: Remove another cabinet and repeat step 3 to 5.
Step 7: Power on the system.
Step 8: Use the Mirror Smart 160 as a new hard drive.
n Supports HOT SWAP.
n Has an auto-eject handle on the cabinet to indicate a failed hard drive.
n Alarm warning for a failed hard drive.
n Has an alarm-off resetting button.
n Supports instant rebuilding (up to 2500MB/m).
n A full array of LED indicators.
n Has an on-board System On Chip (SOC) SCSIDE® engine.
n Has lower CPU system loading.
n Supports multitasking.
n Has aluminum & steel heat sink frame design.
n Supports cross-platform operation systems like Windows 98/ME/NT/2000/
XP, Server 2003, Linux, Mac, Sun Solaris and FreeBSD.
The same 8 steps are for ARS-2016E, too.
Step 1: Make sure that all cables are connected firmly to your PC.
Step 2: Take the cabinet out of the Mirror Smart 160.
Step 3: Put a hard drive into the cabinet and connect it with the internal cable.
Step 4: Replace the cabinet to the Mirror Smart 160.