User`s manual

20
ARS-2016/2016E Manual
Please follow the instructions below to set DIP switch properly.
Give a unique SCSI ID number to each ARS-2016E in a daisy chain according to
the following figure. Even if there is only one ARS-2016E, you still need to give it an
ID number.
1 èON-SCSI ID 1
2 èON-SCSI ID 2
3 èON-SCSI ID 4
4 èON-SCSI ID 8
5 èReserve
6 èReserve
7 èReserve
8 èReserve
Figure 4-8
The above figure without the last two columns means the DIP switch of ARS-2016.
For the illustration of SCSI ID number in ARS-2016E, please see Figure 4-9 on the
next page.
Default: All OFF (ID=0)
ON
OFF
è
è
1 2 3 4 5 6 7 8
ON