User`s manual

15
ARS-2016/2016E Manual
l When rebuilding finishes, ARS-2016E will produce a long beep.
l When HOT SWAP is progressing, the system of ARS-2016E must be
in the state of “Power On”.
l Use Ultra DMA33/66/100/133 HDD to let ARS-2016E perform better.
4.2.2 IDE Hard Drive Connection
Before connecting an IDE hard drive to the cabinet of ARS-2016E, you have to set
the hard drive as “Master” mode by adjusting the jumper setting. In addition, if the
hard drive has contained data or installed with a certain version of OS, you had
better back up your data first, and install the OS again after connection. The hard
drive cannot work without installing the OS again. After connection just treat the IDE
hard drive as a new one.
Figure 4-1
DIP Switch
SCSI Connectors
The auto-eject handle on the cabinet
indicates a failed hard drive
HDD Cabinet