User`s manual

12
ARS-2016/2016E Manual
The control panel of ARS-2016/2016E is described in details below.
l During normal operation, if the system detects a failed hard drive, the
failed drive LED will glitter 10 seconds in alarm. Then, it will keep lighting
with handle ejecting. It indicates that the failed drive needs to be replaced.
l After a new drive is installed and plugged, the system will check the new
drive. At this moment, LED A , B and C will keep lighting. The
currently checked new drive LED will glitter to indicate the hard drive.
l When the new drive is ready, LED A ,B and C will keep lighting,
and the new drive LED will keep glittering. Yet, LED A , B and C
will light to indicate that the system is rebuilding data to the new drive.
Figure 3-2
NOTICE: Replace the handle to “Close” after installing all devices
otherwise the “Alarm” will be activated when power is on.
A
B
C
handle You must press here to lock