Specifications

1-81-8

1-8

Chaosdr 1 Mnshdranarc CdrbrhoshnnChaosdr 1 Mnshdranarc Cdrbrh oshnn

Chaosdr 1 Mnshdranarc Cdrbrhoshnn

1.6 DDR DRAM Installtion1.6 DDR DRAM Installtion

1.6 DDR DRAM Installtion

The motherboard supports a maximized 2GB memory. It provides

two 184-pin unbuffered DDR sockets. It supports 64MB to 1GB

DDR memory module.

DDR DRAM Installation Procedures:

1. The DDR socket has a “Plastic Safety Tab” and the DDR

memory module has an asymmetrical notch”, so the

DDR memory module can only fit into the slot in one

direction.

2. Push the tabs out. Insert the DDR memory modules

into the socket at a 90-degree angle then push down

vertically to fit onto place.

3. The Mounting Holes and plastic tabs should fit over the

edge and hold the DDR memory modules in place.

Bank Memory module

DDR 1 64MB, 128MB, 256MB, 512MB, 1GB

( Bank 0-1 ) 184 pin, 2.5V DDR DRAM

DDR 2 64MB, 128MB, 256MB, 512MB, 1GB

( Bank 2-3 ) 184 pin , 2.5V DDR DRAM

Total System Memory (Max 2GB)

184Phn CIMM S nbk ds184Phn CIMM S nbk ds

184Phn CIMM S nbk ds

80 pins 104 pins

Note:

When you plug or unplug DDR module, you must

check your power supply is off.