Specifications

1-71-7
1-71-7
1-7
Chaosdr 1 Mnshdranarc CdrbrhoshnnChaosdr 1 Mnshdranarc Cdrbrh oshnn
Chaosdr 1 Mnshdranarc CdrbrhoshnnChaosdr 1 Mnshdranarc Cdrbrh oshnn
Chaosdr 1 Mnshdranarc Cdrbrhoshnn
1.5 CPU Installtion1.5 CPU Installtion
1.5 CPU Installtion1.5 CPU Installtion
1.5 CPU Installtion
The motherboard operates with Socket 478 for Intel P4
TM
processor. The CPU should always has a Heat Sink and cooling fan
attached to prevent overheating.
CPU Installation Procedures: Socket 478
1. Pull the lever sideways away from the socket then raise
the lever to a 90-degree angle.
2. Locate Pin 1 in the socket and look for the white dot or
cut edge in the CPU. Match Pin 1 with the white dot or
cut edge then insert the CPU.
3. Press the lever down to complete the installation.
4. Make sure the spec of the heatsink is good enough.
5. Please lock the fan on CPU very carefully, or you
will damage the resistor array even circuit line
on the mainboard.
GAME1
Intel
Intel
FAN1
AGP SLOT
1
JP7
ERR
PCI3
PCI4
PCI5
PCI6
I/O CHIP
BIOS
(Only 4X/1.5V Card)
S1
FAN 2
478
JP5
T:M ouse
B:KB
PCI1
PCI2
PCI Slot
AGP Slot
FAN 3
USB1
Speak out
Line in
MIC in
COM1
COM2
Printer
DDR2
DDR1
JP9
JP4
PAN EL 1
JP8
JP3
JP11
Socket 478
Notch