Specifications

1-111-11

1-11

Bhapter 1 BIOS SettpBhapter 1 BIOS Settp

Bhapter 1 BIOS Settp

Onboard FDC Controller

Enabled (default) Enabled onboard FDC

Controller.

Disabled Disabled onboard FDC

Controller.

Onboard Serial Port1

Select an address and corresponding interrupt for the first

and second serial ports.

The Choices: 3F8/IRQ4(default), Auto, (2F8/IRQ3),

(3E8/IRQ4), (2E8/IRQ3), Disabled.

Onboard Serial Port 2

Auto BIOS will automatically setup

the Serial Port 2 address.

3F8/IRQ4 Enabled onboard Serial Port 2

and address is 3F8.

2F8/IRQ3 (default) Enabled onboard Serial Port 2

and address is 2F8.

3E8/IRQ4 Enabled onboard Serial Port 2

and address is 3E8.

2E8/IRQ3 Enabled onboard Serial Port 2

and address is 2E8.

Disabled Disabled.

UART Mode Select

This item allows you to select which Infra Red(IR)

function of the onboard I/O chip you wish to use.

The Choices: Normal(default), IrDA, SCR, ASKIR.

UR2 Duplex Mode

This item allows you to select which Infra Red(IR)

function of the onboard I/O chip you wish to use.

The Choices: Half (default), Full.

ECP Mode Use DMA

The Choices: 3(default), 1.