User manual

h) SEARCH
This button can be used to enter playback sub-menu for searching out proper
recorded file for playback.
i) FUNC
This button is reserved for future use.
j) LOCK
In order for only authorized person to operate buttons in front panel, this LOCK button
can be utilized. If this button is pressed, all of buttons in front panel are not operated
at the same time LOCK LED ON. To release button locking, password will be
requested after pressing LOCK button. If correct password is input, button locking will
be released.
3. Direction buttons and Enter Button
a) Direction buttons are used to move LEFT, RIGHT, UP and DOWN in menu.
b) ENTER button is used to select parameter in the menu. And in playback, it is used to
select one of listed file for playback after searching recorded files.
4. REC/ STOP, REW(◄◄), FF(►►), PLAY/ PAUSE (/ II), and STOP( ) buttons
a) / button can be pressed to start recording while emergency recording is
be pressed manually for all channel recording while emergency happens.
b) REW button can be used for high speed backward playback. It support 2 to 16 times
playback speed.
c) FF button to do high speed forward playback. It support 2 to 16 times playback
speed.
d) PLAY/ PAUSE is used to freeze playback and also restart playback while pause.
e) STOP button is used to stop playback
5. LED Indicators
a) POWER
This green LED will turn “ON” when Power is “ON”.
b) REC
This red LED will turn “ON” during recording.
c) ALARM
This red LED will turn “ON” when motion detection or alarm have been triggered.
d) LOCK
This red LED will turn “ON” while LOCK button is working.
e) HDD
This red LED will blink while recording or playback.
f) CF
This red LED will will turn “ON” when CF card is inserted. And it will blink while
firmware upgrade or backup.
6. USB port
inserting USB 2.0 Drive for data backup and FW upgrade; USB DVD-RW & USB
mouse can also be supported.
8