User manual

**Below Function is the same as NetViewer software function.
Please refer to 10.2 NetViewer Software**
4) Display Widow Selection
5) PTZ Control
6) Local Setting
7) Remote Setting
8) CAPTURE
9) RECORD
10) MIC ON, Volume Control and Mute
11) Remote Search
12) Event Notification
If motion in any channel is(are) detected or alarm is (are) triggered in any remote DVR,
event information will be noticed to CMS software as below picture. CMS software shows
additional “Ëvent Window”
13) E-MAP function
In main GUI of CMS software, if ”E-MAP” icon is clicked, below default E-Map will be
appeared.
The path to load “Ë-Map” is C:\Program files\DVR_APP\. You
can add your E-Map picture in this path. It can be loaded by
“Image Load” icon.
Cameras No. can be placed in somewhere in E-MAP by
dragging the camera icon.
The camera layout in E-MAP can be stored by “Save Info”
icon.
If each camera No. in “E-MAP” is clicked, full picture will be
displayed. To return “Ë-MAP” mode again, ”E-MAP” icon can be
clicked.
77