User manual

“USER” and “ PASSWORD”, new “CONNECT ADDRESS” will be enrolled in address list.

NOTE: One of easier way to add “CONNECT ADDRESS” is to click “ADD” after

modification of “CONNECT ADDRESS” using “MODIFY”. It can be useful to add

“CONNECT ADDRESS”, when there is at least one address list.

B) How to delete “CONNECT ADDRESS”

First, select one of listed “ADDRESS” which want to remove and then click

“DELETE” to remove it.

C) How to modify “CONNECT ADDRESS”

First, select one of listed “ADDRESS” which want to modify and modify one of NAME,

ADDRESS usually. Then click “MODIFY” to modify it.

D) How to CONNECT Network

Select one of listed “ADDRESS” which want to connect. If network connection is

succeeded, below initial “NetViewer Software” will be appeared in PC with message “

Connect Success” in bottom of NetViewer software GUI. If not, error message will be

displayed after for a while.

3)Network Disconnection

When “DISCONNECT” is clicked for network disconnection, network connection

will be disconnected soon.