User manual

2) Network Connection
When this “CONNECT” icon is clicked, below “CONNECT ADDRESS” window will
be appeared.
A) How to add “CONNECT ADDRESS”
● NAME: Arbitrary name which can be remembered easily or be differentiated
can be filled in “NAME”.
● ADDRESS: The IP address of DVR which want to access can be written in
“ADDRESS”. This IP address can be confirmed in “IP address of NETWORK
menu” in DVR.
● PORT number: default is “10000”. ( It can be changeable according to network
environment.)
● USER is assigned as “ADMIN” .
● PASSWORD: The “password of DVR” which want to access should be input here. If
the password is not correct, network connection will be failed.
Note: The requested password is the same as the DVR password.
If “ADD” is clicked after all the parameter including “ NAME”, “ADDRESS”, “PORT”,
51