User manual

For assigning IP ADDRESS, SUBNET, GATEWAY and DNS in STATIC IP mode, ENTER
button can be pressed on the column of IP address, SUBNET, GATEWAY and DNS. Then
below NETWORK SETUP figure will be appeared.
The 4 number group with 3 digit expressing IP ADDRESS, SUBNET, GATEWAY and DNS
can be increased by UP button or decreased by DOWN button. The position movement
between 4 numbers can be done by LEFT or RIGHT button. The position movement from
IP address, SUBNET to DNS can be done by UP or DOWN button. In order to save the
assigned number of IP address and so on, “Yes” should be selected by ENTER button in
“check” box.
6) PORT: Port number for TCP/IP connection in DVR
Net-Viewer software should have same port Number to access remote DVR through
network. Default Port No. is 10000. If Port is set as 10000, port number of from 10000 to
10020 is used in DVR. Therefore, If DVR is used in network environment with firewall, port
number of from 10000 to 10020 should be opened for DVR remote access. If IP sharing
machine or router is used with DVR, “port forwarding” should be done.
7) TIME ZONE: City Name
Time information can be synchronized with time server.
NOTE: Time zone setting can be useful for Summer Time setting.
34