User manual

2) Event Setup2 parameter Setting
3) MOTION AREA CH and 4) MOTION AREA
Whenever ENTER button is pressed, marking within above red circle will changed from
“DIRECTION” mark to “+” and “-” mark. In the “Direction” mark, motion area can be
moved with direction button like LEFT or RIGHT or UP or DOWN button. In the “+”
mark, motion area can be enabled by direction button. In the “-” mark, motion area
can be disabled by direction button.
Motion channel can be changed by or button from CH1 to CH16.
30
Motion Area CH selection
Motion Area selection
Sensitivity (5 step):
Very Low, Normal, Very High
Sensor: N.O or N.C
Input: CH1 to CH16
Exit this menu.
Output:
Trigger Output Selection
Any output OFF, CH1 to CH4
can be selected.
Buzzer: On/ Off
The MOVE mode which can just
move motion area by LEFT or
RIGHT or UP or DOWN button.