User manual

For the first time using your DVR, you will want to establish the initial settings. This

includes setting items such as time and date, password, display, record mode, network

and so on.

In order to program Main Menu, first press MENU button of front panel in DVR.

If ADMIN LOCK is set as YES (factory default is YES), below figure will be appeared.

Then input password number using 1, 2, 3, … , 9 Channel Buttons (Factory default

password is 11111111), and press ENTER button. MAIN MENU will be appeared.

NOTE:

To access the DVR Main Menu, press MENU. To escape MENU, ESC button can be used.

Buttons for movement in Menu are ▲ or ▼. Button for selection is ENTER, Button for

increasing or decreasing setting value is or . Press ◀ ▶ ESC to return to the previous

MENU after setting and to save the values of setup.