Operating instructions
TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual
Page 99
Form 35 Continued
35-xx-05 - Line Pick Up Enable (Allows a non-ringing station to answer an incoming call):
Enable = An incoming call on this line can be answered by non-ringing stations.
Disable = An incoming call on this line can not be answered by non-ringing stations.
This feature is to assign "Private Lines" in conjunction with the programming of dial 9 groups, or to prevent
incoming calls being answered by users other than the ring assigned stations
Value Day Operation Night Operation
0 Disable Disable
1 Disable Enable
2 Enable Disable
3 Enable Enable
35-xx-06 - Loud Bell Operation:
The system does not provide any voltage from the assigned relay. A separate ring voltage and ring device will
need to be provided by the installer
0=Inoperative 1=Relay #1
35-xx-07 - Day Ring Type
0=Common Audible
Rings all assigned Extensions simultaneously
1=Linear
Each incoming call rings the first available Extension in order of the Extensions assigned in Program 01-tk.
2=Circular
The first incoming call on each trunk rings the first assigned Extension, the 2nd incoming call rings the next
station, etc.
3=Hunt
If an incoming line rings an extension which is busy or does not answer, after the assigned Hunt Time (Program
05-08-01,) the call will ring the next available extension assigned in the same group. If the next ringing station is
busy the call will immediately move to the next ring assigned extension. If the station does not answer then the
call will wait for the Hunt time and then ring the next assigned extension. Once the ring assignment has passed a
station which is busy it will provide Off Hook Busy Remind signal and when the station is free if the call is still
unanswered the station will begin ringing for that call. Stations which do not answer a call will also continue to
ring until the call is answered.
4=Private Line
This is for an incoming private line. The station that owns this private line can set call forward (All, Busy, No
Answer) for this private line to the Voice Mail Port (See Program 43-ST-02).
08 - Night Ring Type:
Parameters for this option are the same as 35-xx-07 above, except they apply when the system is in Night
Service only.
0=Common Audible 1=Linear 2=Circular
3=Hunt 4=Private Line
Note: Private Line (35-CO-07/08) can be used when only one station is programmed as the ringing
station on Form 01 or 02. When Private Line is enabled, any call forwarding programmed on the
station will be honored by the incoming CO line.