Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 96 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 29 - CO Line Specifications #1:
Line Data 01 02 03 04 05 06 07 08
29-01 Line 01
29-02 Line 02
29-03 Line 03
29-04 Line 04
29-05 Line 05
29-06 Line 06
29-07 Line 07
29-08 Line 08
Range 0 0-1 0 0-8 0-8 0-1 0-9 0-9
Default 0 1 0 0 6 0 0 0
29-xx-01-– CO Line Loop Receive Gain:
This parameter allows adjustment of the system’s analog trunk interface to adapt to different CO loop resistance.
0 = 0 Km (default) 1 = 3 Km 2 = 5 Km
29-xx-02 – UCD Function Selection: This parameter enables or disables the UCD function for each trunk
individually and is able to select whether UCD operates in Day or Night or Both Modes.
0 Day Disable - Night Disable 1 Day Disable - Night Enable
1
2 Day Disable - Night Enable
2
3 Day Disable
1
- Night Disable
4 Day Enable
1
- Night Enable
1
5 Day Enable
1
- Night Enable
2
6 Day Enable
2
- Night Disable 7 Day Enable
2
- Night Enable
1
8 Day Enable
2
- Night Enable
2
*1: Enable ACD-1 function only when all ring assigned stations are busy.
*2: Enable ACD-1 function when time set in mode 05-09-06 has elapsed even if the ring
assigned stations are idle.
29-xx-01-– CO Line Loop Transmit Gain:
This parameter allows adjustment of the system’s analog trunk interface to adapt to different CO loop resistance.
0 = 0 Km (default) 1 = 3 Km 2 = 5 Km
29-xx-04 - Set Ringing Tone:
This feature allows each trunk to ring at DK telephone sets with its own individual ring frequency and override the
frequency set by the user for all calls.
0=Use station’s default ring 1-8=Use assigned trunk ring cadence