Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 90 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 18 - Toll Plan Assignment:
G1-a10aw
18-00 - ITem 01 02 03 04 05 06 07 08 09 10
18-01 - ITem 01 02 03 04 05 06 07 0-8 09 10
18-02 - ITem 01 02 03 04 05 06 07 08 09 10
18-03 - ITem 01 02 03 04 05 06 07 08 09 10
18-04 - ITem 01 02 03 04 05 06 07 08 09 19
18-05 - ITem 01 02 03 04 05 06 07 08 09 10
18-06 - ITem 01 02 03 04 05 06 07 08 09 10
18-07 - ITem 01 02 03 04 05 06 07 08 09 10
18-08 - ITem 01 02 03 04 05 06 07 08 09 10
18-09 - ITem 01 02 03 04 05 06 07 08 09 10
General:
This Mode assigns Toll Plans to trunk lines. The Toll plans are to be written in Modes 51 to 59 and 61 to 66.
Description:
10 toll plans can be used.
Each Toll Plan assigns each trunk line a Toll Class. It is possible to allow a toll class to have different restriction
level on a line by line basis.
Example 1: Form 18-00 is set to 0000dddddd. Any station in the system which is set to toll class 0 will be
unrestricted on lines 1 to 4 but will be unable to dial out on lines 5 to 10.
Example 2: Form 18-01 is set to 111100dddd. Any station in the system which is set to toll class 1 will be restricted
by toll class 1 on lines 1 to 4, will be unrestricted on lines 5 and 6 but will be unable to dial out on lines 7 and 10.
To assign toll plans to stations, see Form 41-st-05, 41-st-06.