Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 88 Version 1.3b October 2005
Includes all versions through G1-a20x
SMDR OUTPUT DATA FORMAT - NEW With CLI Output
ST. TK S TELEPHONE NUMBER Account MM/DD START DURATION RING UNIT
112 01 001188629645752 12345678 10/02 08:35 00:02'35" 00012
112 02 DDI Num:94150112 10/02 08:45 00:10'20" 00'10"
03 CLI NoAns:294176288 10/02 12:00 00:00'00" 00'35"
111 05 CLI Num:294150100*11 10/02 12:35 00:00'05" 00'05"
05 DDI NoAns:94150112 10/02 12:37 00:00'00" 00'27"
Case 1: Outgoing call. All information remains as before.
Case 2: Incoming call on an ISDN system. The number displayed is the Indial number dialed by the calling party.
The system can be programmed on a station by station basis to select whether calls to that station will display the
Indial number dialed or the CLI information of the incoming caller
Case 3: An incoming call rang for 35 seconds and no one answered. The CLI number of the calling station is
displayed.
Case 4: An incoming call on line 5 (ISDN) was answered by station 111. The SMDR displayed the CLI number
(294150100) of the calling party and the extension number (112) of the calling party. The extension number shown
is what the system will receive if the call is from another Hybrex with ISDN. The format may be different or non
existent from other telephone systems or on PSTN lines. The system can be programmed on a station by station
basis to select whether calls to that station will display the Indial number dialed or the CLI information of the
incoming caller. The number 94150100 is the pilot number of the Indial group.
Case 5: An incoming call rang for 27 seconds and no one answered. The Indial number the calling station dialed is
displayed.