Operating instructions

TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual
Page 87
CASE 6: October 2, 12:35 P.M., Station 116 made a call, which was restricted.
CASE 7: Line 1 was used by station 121 for 55 seconds then put on hold. One meter pulse was recorded against
this station for its section of the call.
CASE 8: The held line 1 was answered by station 117 and he occupied the line for 3 minutes and 10 seconds. Four
meter pulses were recorded against this station for its section of the call.
CASE 9: Incoming Line 3, using the DISA function, made an outside call 018220212 on line 5. The Duration time is
for line 5. 3 meter pulses were recorded for this call.
CASE 10: DISA is completed. The Duration time is for line 3.
CASE 11: Incoming call on an ISDN system. The number displayed is the Indial number dialed by the calling party.
The system can be programmed on a station by station basis to select whether calls to that station will display the
Indial number dialed or the CLI information of the incoming caller
CASE 12: An incoming call rang for 35 seconds and no one answered. The CLI number of the calling station is
displayed.
CASE 13: An incoming call on line 5 (ISDN) was answered by station 111. The SMDR displayed the CLI number
(294150100) of the calling party and the extension number (112) of the calling party. The extension number shown
is what the system will receive if the call is from another Hybrex with ISDN. The format may be different or non-
existent from other telephone systems or on PSTN lines. The system can be programmed on a station by station
basis to select whether calls to that station will display the Indial number dialed or the CLI information of the
incoming caller. The number 94150100 is the pilot number of the Indial group.
CASE 14: An incoming call rang for 27 seconds and no one answered. The Indial number the calling station dialed
is displayed.