Operating instructions

TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual
Page 79
Form 09 - System Speed Dial Assignment:
Special Characters
HOLD=Pause (p) MSG=Tone (T) TRF/FL=Flash(F)
MIC/AT = Change Key
Toggles between Line entry, telephone number entry and name entry.
Bin # 09- TK: ## Number Name
____0
____1
____2
____3
____4
____5
____6
____7
____8
____9
General:
This program permits the assignment of up to 500 sets of system speed dialing codes.
Description:
nnn = 100-599 = Speed dial code, up to 500 sets in total.
DP = 01-30 = Digit Pointer for telephone number.
30 digits per speed dial code.
tt = 01-10 = Pre-assigned CO line number.
Pre-Assigned CO Line:
Press the {Change} key to change or clear the Pre-assigned CO line number. This CO line is the dedicated
outgoing line for the speed dial code. If the user presses a speed dial code without selecting a CO line first, the
system will select this CO Line automatically. If no CO line is assigned, the system will select an available CO line
according to the assigned Dial 9 group (Program 41-nnnn-04). A line may also be selected directly by the user.
Telephone Number:
30 digits maximum may be entered in each memory.
In addition to the digits 1 to 0, *, # the following can also be stored: Pause, Flash, Pulse to DTMF. Each function
occupies one digit.