Operating instructions

TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual
Page 59
Form 05-08 - System Parameters Form - Timer/Codes
Form 05-08-T 01 02 03 04 05 06 07 08
Item
Range of Entries 0 - 9 0 - 1 0 - 9 0 - 1 0 - 8 0 - 9 0-9 0
Default 5 0 0 0 7 1 7 0
05-08-01 – Ring Hunt Interval (seconds):
If setting is n, Then when an incoming call rings the first ring assigned extension and that extension is
busy, after n seconds the call will ring the second of the ring assigned extensions. If the 2
nd
extension
is busy the call will go to the 3
rd
extension immediately. All stations which have been passed by the
ring assignment will receive off hook busy remind. Up to 16 stations can be in the ring hunt group. If
the setting is 0 then only the first ring assigned station will ring.
0=0 1=2 2=4 3=6 4=8
5=15 6=30 7=60 8=120 9=250
05-08-02 - Direct CO Access:
This feature enables or disables the ability of stations to
use a DSS key to access CO lines not in their own dial 9
group.
0=Disable 1=Enable
05-08-03 – SLT Busy Remind Tone Timer:
This feature enables a tone to indicate call waiting for a busy single line telephone and sets the
interval between tones. The interval between tones will be the Off Hook Busy Remind Interval (t) x by
the setting in this parameter. Off Hook Busy Remind Time is set in Mode 05-01-05.
0=Disable 1=1 X Value of Form 05-01-05 2=2 X Value of Form 05-01-05
3=3 X Value of Form 05-01-05 4=4 X Value of Form 05-01-05 5=5 X Value of Form 05-01-05
6=6 X Value of Form 05-01-05 7=7 X Value of Form 05-01-05 8=8 X Value of Form 05-01-05
9=9 X Value of Form 05-01-05
05-08-04 - DISA Operator Recall Location (No Answer):
This parameter decides to which Console group an unsuccessful DISA call will be transferred if the
called station has transfer enabled in 46-st-04.
0=Console for the Called Station's group (41-st-01)
1=Console for the Incoming Trunk's group (36-gp)