Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 56 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 05-06 Continued
05-06-06 -CO Disconnect Timer for ECF, Unsupervised Conference, and DISA:
This parameter sets the time that the system will allow an Unsupervised Conference or External Call
Forward to continue before sending a warning tone to the parties and then disconnecting the call.
If either party sends a DTMF digit (0-9) to the system the timer will reset and allow the call to
continue for the time setting. If reversal supervision is used it will override this setting.
0=Disable 1=1 minute 2=2 minutes 3=3 minutes 4-9=4 minutes
05-06-07 - Single Line Telephone Hold Procedure:
This parameter is to set whether Single Line Telephones use [FLASH] (or [Hook-switch]) or [FLASH,
7] (or [Hook-switch, 7]) to place a call on Hold.
0=Flash only 1 +[7=Flash]
3=Flash +[7] (System returns
tone after Flash)
05-06-08 - Station Hunting Group Ring Method:
This parameter sets the ring method used in the station hunting groups. Pilot numbers for hunt
groups are set in Mode 67 and Day/Night ring stations are set in Mode 68 & 69. This system wide
parameter can be overridden by programming in Form 67-GP.
0 = Common 1 = Linear 2 = Circular