Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 54 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 05-05 Continued
05-05-05 - Name Function:
This parameter enables the naming feature for trunks, extensions and speed dials.
Features \ Values 0 1 2 3 5 7
Display Name instead of number
for Extension
X X X X
Directory Dial for Speed Dial X X X
Directory Dial for Extension X X
X: The feature is enabled.
Note 1: When any of the above features are enabled the total number of speed dial sets will be
reduced by 300. See Mode 05-04-06.
Note 2: For setting name for Extension/Speed dial/Trunk, Please refer to the programming mode
43 / 09 /35.
Note 3: For setting “Directory Dial” key, Please refer to mode 07.
0=No Names Used 1=Display Names for Extensions
2=Name Speed Dial. (Allow Dial by Name
Speed Dial only)
3=Name Extensions & Speed Dial (Dial by
Name)
5=Name Display and Dial by name for
Extensions only
7=Enable Name display and speed Dial.
Enabled Dial by name for Extensions and
Speed Dial
05-05-06 – Dial Tone Detector:
If setting is enable, then the system will send out the dialing signals after the system detects the Dial
Tone which is sent from the exchange, if dial tone is not detected by the system then dialing signals
will not be sent out. If setting is disable, then the system will send out dialing signals whether Dial
Tone is detected or not.
0 = Enable 1 = Disable
05-05-07 – Auto Redial Attempts:
This parameter is to set the number of auto redial times which the system will attempt.
0=Disabled 1=3 Attempts 2=6 attempts 3=10 attempts 4=20 attempts
5=30 attempts 6=40 attempts 7=50 attempts 8=60 attempts 9=70 attempts
05-05-08 - Auto Redial Inter-Call Timer (seconds):
This parameter is the time duration between the system hanging up an auto redial attempt and
starting to redial automatically
.
Off Hook Auto-Redial Pause Time
(Program 05-05-08), Y
seconds
Off Hook
Auto-Redial Ringing Timer On Hook Auto-Redial Ringing Timer
0=10 1=20 2=30 3=40 4=50
5=60 6=70 7=80 8=90 9=100