Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 44 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 04 - Console Assignment Form
Console Group 01 Console Group 02
04 – 01 - 01 02 03 04 04 – 02 - 01 02 03 04
Extension Extension
Console Group 03 Console Group 04
04 – 03 - 01 02 03 04 04 – 04 - 01 02 03 04
Extension Extension
Console Group 05 Console Group 06
04 – 05 - 01 02 03 04 04 – 06 - 01 02 03 04
Extension Extension
Console Group 07 Console Group 08
04 – 07 - 01 02 03 04 04 – 08 - 01 02 03 04
Extension Extension
General:
This program permits the selection of the consoles in each station group.
Description:
1. There are 8 console groups available.
2. A total of four stations can be set to be the console in each group.
3. The first assigned station is the master console.
4. To clear all entries press [REDIAL]. Do this in ALL unused groups.
5. It is recommended that only one console is used per group.
Extension numbers can be put in to determine what stations will be considered system Operators. Extension
numbers that appear in a group will ring when another station in the same group Dials 0. When a station dials 0,
the routing is controlled by the setting of Form 41-Station-01. Please see Form 41 for more information.
System Default has Group 01 programmed with Extensions 11, 12, 13, and 14 as system consoles.