Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 42 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 02 - Night Ringing and Ringing Line Preference Assignment
Ring Type : Linear / Circular / Hunt / Private / Common (See Form 35-CO-08)
(Line 1) 02-01- 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Extension
(Line 2) 02-02- 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Extension
(Line 3) 02-03- 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Extension
(Line 4) 02-04- 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Extension
(Line 5) 02-05- 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Extension
(Line 6) 02-06- 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Extension
(Line 7) 02-07- 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Extension
(Line 8) 02-08- 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Extension
General:
This program assigns each incoming line to ring the programmed stations at night. The ringing methods can be
LINEAR (ring the first available station), CIRCULAR (Ring the next station following the last station who answered
an incoming call), HUNT (Ring the first assigned station for a set period of time (program mode 05-08-01) then if no
answer ring the next ring assigned station then the next etc.) or COMMON AUDIBLE (All stations will ring
simultaneously). See Program Mode: 35-tk-08 to assign.
Description:
1. This program sets Night Time ringing.
2. The station number can be 2,3,4 digits.
3. A total of 16 stations can be assigned to ring for each trunk.
4. If the location is to be assigned to no station, the location value is set to 0.
5. To clear all entries press [REDIAL].
Any station programmed on a line will immediately be connected to it when the handset is lifted or the speaker
button is pressed. It also controls ringing assignments as per form 35-CO-08 (Linear, Circular, Private, or
Common). The total number of stations that will ring is determined by Form 29-CO-05.
Example:
IF station 11 is the only station programmed on Form 02-01,
AND Form 35-CO-08 is programmed as 0,
AND Form 29-CO-05 is programmed as 1,
THEN Incoming calls on line 1 will ring ON Extensions 11 only AND only extension 11 will be directly connected to
an incoming call when he lifts the handset or presses the speaker button.