Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 40 Version 1.3b October 2005
Includes all versions through G1-a20x
Alphanumeric Entry:
The following table indicates the capabilities of the name programming functions if they are selected on the system.
System Speed Dial, Personal Speed Dial, Stations, CO Lines and Sensors may be programmed with names.
Key 1 = (Blank Space) - 1 Key 2 = A - B - C - 2
Key 3 = D - E - F - 3 Key 4 = G - H - I - 4
Key 5 = J - K - L - 5 Key 6 = M - N - O - 6
Key 7 = P – Q - R - S - 7 Key 8 = T - U - V - 8
Key 9 = W - X - Y – Z - 9 Key 0 = (Period). : & 0
Key # = ( ) $ # Key * = (Dash) / ! *
DSS Key 1 = Backspace Cursor (Left) DSS Key 2 = Cursor Forward
If an entry is made that is not
within valid system parameters,
the Superkey system will not
accept the entry when [SAVE]
is pressed. The Speaker on
the programming set will return
a busy tone and the LCD
Display will place the
programming cursor under the
offending entry. You may
make corrections and press
[SAVE] again. If multiple errors
are made, the system will
continue to return you to the
illegal entries as others are
corrected.
It is not necessary to re-enter
existing information on a multi-
item form. You need enter only
the information that is to be
changed. You may move the
cursor to the left or right in
order to access only the
specific entry that you want to
change. You may press
{SAVE} without regard for the
placement of the cursor on the
LCD display.
Programming Overlays