Operating instructions

TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual
Page 195
Station Function Form 46-st-08
There are three parameters under control of 46-st-08.
1. ACP Functions as:
a. Doorphone
b. Wall Mount Telephone
2. Door lock function activates the relay:
a. in the ACP
b. in the KSU.
3. Security Access is:
a. Via password OR Identification Card
b. Via password AND Identification Card.
Form 46-st-08 ACP Function (Applies only to stations equipped with ACP Device)
Value Doorphone / Wall Mount Phone Activate Relay Security Access
0 Doorphone Inside ACP ID Card OR Password
1 Wall Mount Keyphone Inside ACP ID Card OR Password
2 Doorphone Use TD-824i MSC Card ID Card OR Password
3 Wall Mount Keyphone Use TD-824i MSC Card ID Card OR Password
4 Doorphone Inside ACP ID Card AND Password
5 Wall Mount Keyphone Inside ACP ID Card AND Password
6 Doorphone Use TD-824i MSC Card ID Card AND Password
7 Wall Mount Keyphone Use TD-824i MSC Card ID Card AND Password
Dial 9 Access (System Option)
Form 05-04-02 = 0
Forced Account Code for ACP (as wall mount phone)
Form 17 (01-48) (Program Forced Account Code)
Form 40-st-08 = 01-48 (specify the Account Code programmed given in Form 17 for a specific station)
Password for ACP (as doorphone)
There are two ways to assign a password for ACP
1. Use/share the same code given for FAC; Form 17 & Form 40-st-08
2. Use the password in Form 13-05.
This password will be available for all ACP in the system.
Note: Password given in Mode 13-05 will only be applied when FAC is not used or programmed.