Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 184 Version 1.3b October 2005
Includes all versions through G1-a20x
All Paging
Lift the handset or press SPKR.
Press # and 0.
Pulse To Tone Conversion
This feature is of use to you if you are located in an area where your telephone company does not accept DTMF
(Touch Tone),This feature lets you dial DTMF (Touch-Tone) for services such as remote voice mail, bank by
phone, etc.
Press MSG key.
Your telephone set will now dial DTMF digits instead of pulse dialing on a CO line.
Room Monitor
If you need to listen in on another room, such as a baby’s room or a secured room, you can set this function up so
that any telephone in the system can monitor the room by dialing the extension number.
At the telephone that you are going to monitor:
Press the SPKR key or take the handset off hook.
Dial 770.
The telephone is now in the room monitor mode. Any station can now dial the extension number of the station and
be placed in the Room Monitor mode. The calling station will hear room activitiy. This connection will stay in place
until the calling station hangs up or until the Monitored station is placed on Hook or the SPKR is turned off.
Only one station at a time can monitor a room, but the monitored station will stay in the room monitor mode until it is
reset. So you can set up a monitor from one telephone and if your activities take you to another room, when you
leave the first room, hang up. When you get to the next room, you can re-enter the monitor mode at the new
extension, so you can go all over a building and still be able to monitor an individual room.
Saved Number Redial
Saved Number Redial allows you to save a telephone number for use at a later time. This feature is in addition to
Last Number Redial.
Automatic Save:
1. You have dialed an outside call. The number does not answer or is busy.
2. Press [SAVE].
3. The lower portion of the LCD (on display telephones) will display:
Auto Save
4. You may hang up.
5. Make other calls if you wish.
6. While your telephone is idle, press [SAVE].
7. The telephone will access an available line, turn on your speaker and redial the saved number.
8. If you take no action, the system will monitor the call for a programmable period of time and then disconnect the
call and return your telephone to idle.
9. The telephone set will periodically access a CO line and continue to redial the saved number. Steps 7 and 8
will continue for a programmed number of times or until you lift the handset or press [SPK] while the system is
on the line or until you make another call.
Note: If you lift the handset or press [SPK] immediately before step 6 above, the system will dial the number
without the automatic redial functions taking effect.