Operating instructions

TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual
Page 183
Mute
Use the mute function any time you don’t want the outside party to hear what you are saying.
While you are on the handset:
Press MIC/AT key.
The microphone on the handset will be muted. The LED on the MIC/AT button will flash rapidly.
Press MIC/AT key.
The microphone on the handset will be enabled. The MIC/AT button will go dark.
While you are on the speakerphone:
Press MIC/AT key.
The microphone on the Speakerphone will be muted. The LED on the MIC/AT button will flash rapidly.
Press MIC key.
The microphone on the Speakerphone will be enabled. The LED on the MIC/AT button will remain lit.
Operator Set Timed Reminder or Wakeup (Remote Setup)
This allows the system operator to set a Timed Reminder or Wake Up call for another station within the system.
Press PGM
Press REDIAL
(Or Press Remind if your phone is equipped with a REMIND Key)
Enter the extension number of the station you where you want to set up a reminder or wake up call.
Enter the time for the reminder (24 hour clock, please).
Enter the type of call (01-98 for a reminder, 99 for a wakeup call).
Press SAVE.
Press SPKR
Operator Timed Reminder or Wake Up
Note: This sets a message only on your own station!
Press PGM.
Press HOLD.
Press 8.
Enter the time you want the reminder to occur (must be in 24 hour format).
Enter the duration (01 through 98). That is how long you want the reminder period to be. This type of reminder will
occur every day at the same time.
OR
Enter 99 for a Wake Up call. This call will occur only once, then never again.
Press SAVE.
Press SPKR to exit.
To cancel:
Press PGM.
Press HOLD
Press 8
Press HOLD.
Paging
Internal Zone
Lift the handset or press SPKR.
Press # and 2.
Then press the one digit Paging Zone Code. (1-8)
You will be connected to the telephones in that zone.