Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 182 Version 1.3b October 2005
Includes all versions through G1-a20x
Immediate CO Line Access
Immediate Line Access will connect you to the first available line in your Dial 9 Group when you lift the handset
while in an idle state.
To Enable/Disable:
1. Press [7], [7], [1].
2. If Auto Line Access was previously disabled, it is now enabled. If it was previously active, it is now disabled.
Note: Automatic Line Access is only applicable when the handset is lifted. Activation of the [SPK] button will still
provide intercom dial tone. You may still place intercom calls by pressing the DSS button of the desired
party.
Intercom dialing
An intercom call allows you to talk to another station within your telephone system.
Lift Handset or press SPKR.
Dial the extension number of the station you wish to reach.
You can reach another station by using a DSS button if you are equipped with one.
Lift Handset or press SPKR. (Optional)
Press the DSS button of the station you want to call.
Last Number Redial
This feature lets you redial the last number you just called. It’s great when you want to catch that busy number as
soon as it’s free!
Lift the handset or press SPKR. (Optional)
Press REDIAL.
The last (outside) number you called will be dialed again.
Lock / Unlock SMDR from Console
If your system is equipped with an RS-232 port and is using a printer to keep a telephone log, you can temporarily
suspend the output of the RS-232 port so you can change the paper on the printer or for any other reason where
the printer needs to go off line. If you lock the SMDR port, calls will be stored in the TD-824i until you re-enable the
port.
Press SPKR.
Dial 7, 7, 2.
This will toggle the RS-232 port on or off.
If you have an LCD equipped telephone, the display will show the current status of the SMDR port. If it is on, the
display will show “SMDR IS UNLOCK.” If it is off, the display will show “SMDR IS LOCK.”
Macro Keys
This feature will let you program your own “custom” function onto up to 4 keys on your telephone.
Press PGM.
Press one of the assigned Macro Keys (15-22).
Dial the exact keystrokes that you want to save. (Up to 5 keystrokes)
Press the assigned Macro Key again.