Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 180 Version 1.3b October 2005
Includes all versions through G1-a20x
Press HOLD HOLD (that’s pressing HOLD twice).
The call is placed on Exclusive Hold for your extension.
You can alternate between Exclusive Hold and System Hold with each press of the HOLD key.
As noted above, to place a call on Exclusive Hold, press HOLD twice.
Pressing HOLD again will return the call to regular system hold.
Another press of the HOLD key will return the call to Exclusive Hold.
To retrieve a caller from Exclusive Hold at your station.
Lift Handset or press SPKR.
Press the line button that you placed on Exclusive Hold
OR
Dial 80 plus the line number that you placed on hold
You will be connected to the caller.
To retrieve a caller from Exclusive Hold at another station. (Yes, you can get a call from another extension…but
you have to make an effort to pick it up. It’s difficult to pick this call up by accident).
Press CO line button. Press HOLD.
You will be connected to that caller.
Feature Menu
Digital LCD telephones allow you to select, activate and program most system features even if you do not have all
the keys that are required to program. This is called the feature menu.
1. Press [PGM],[0] . The LCD will begin scrolling through the feature menu. Each menu item will be displayed for
two seconds. The system will then scroll to the next menu item.
2. You may press [*] to step the display backwards or press [#] to move the display forward. At any time you may
press [0] to access the feature that is displayed on the LCD.
3. Feature programming or activation continues according to the individual descriptions in this features guide.
Note: The feature menu also lists the keystrokes required in order to invoke or program a function within
the Superkey system.
Flash (To an outside telephone line)
Use this feature to make use of telephone company services such as Call Waiting and Three way calling.
Or to access Centrex features like call transfer and call conferencing.
Press the TRF/FL key.
The outside line will receive a flash.
Note: This feature is dependent upon system programming. Some program settings will provide a disconnect
when the TRF/FL button is pressed.
Forced Account Codes
If telephones are restricted within the system, this feature can allow people to enter a code and place calls on a
telephone that otherwise would be restricted.
Press PGM.
Dial 4
Enter the forced account code.
If the forced account code you dialed is recognized by the system, you will be connected to a CO line. You can then
place an outgoing call.
If the system does not authorize your account code, you will hear busy tone.