Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 178 Version 1.3b October 2005
Includes all versions through G1-a20x
Conversation monitor
If you need to monitor a conversation for any reason, this feature will let you observe an existing conversation.
Please be aware that this option is a level controlled option (from system programming), so you may be able to
override no phones, a few phones or all phones, depending on your telephone’s access level. Some stations may
not have access to this feature.
Dial a station. It is busy.
Press #. If you have access, you will be connected to the station.
Date and Time Setting (Operator Function)
You must be a system operator to set the date and time.
Press PGM.
Press HOLD
Press 7
Press SAVE
Enter the two digit month (01 - 12)
Enter the two digit date (01 - 31)
Enter the two digit year (97 - 99 or even further)
Enter the hour (00 - 24).
Enter the minute (00-59)
Enter the day of the week (0=Sunday - 7=Saturday)
Press MSG.
Day / Night Service Switching Setup (Operator function)
With this feature, you can make incoming calls ring in different places based on day time or night time. You should
have a LCD equipped telephone to use this feature. It also controls the dialing (toll restriction) capabilities of
telephones if your installer programmed it that way). Yes, you must be an operator to do this. The change from day
to night service may be either automatic, or it may be under manual control of the operator.
Selecting Manual or Automatic Switching:
Press PGM.
Press TRF/FL.
Your telephone will display the current mode (day or night) and status (automatic or manual).
By pressing the * key you will “toggle” between automatic and manual switching.
When you are finished, press SPKR.
Selecting Day or Night Mode When in Manual Switching Mode:
Press PGM.
Press TRF/FL.
You can alternate between Day Service and Night Service by pressing the TRF/FL key.
When finished, press SPKR.
OR
If you have a Day/Night button, you can achieve the same results simply by pressing the DAY/NIGHT key.
Note: Programming of Automatic schedules is done as a function of system programming. For more information
on Automatic scheduling, see Form 20 in the Programming Forms section of this manual.
Dial By Name
Dial by name allows you to use your TransTel DK1-D LCD equipped telephone set to dial intercom calls, personal
speed dial calls, and system speed dial calls by name rather than by number.
Note: In order to utilize Dial By Name, your telephone must be equipped with LCD and a programmed Directory
button.
1. Press [DIR].
2. The LCD will display: 1= Intercom
2= Speed Dial