Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 156 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 86-nnn – Office Code Pattern 700—799:
This form assigns proper redial pattern to each office code (only within your own area code). This is designed
to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your
own area code. There are three possible settings for calls within your own area code. You must define each
type.
0 = Redial pattern is NXX-XXXX (Local call: 7 Digit)
1 = Redial pattern is 1-NXX-XXXX (Local Toll: 1 + 7 Digit)
2 = Redial pattern is 1-NXX-NXX-XXXX (Local Toll: 1 + 10 Digit)
86-700 86-720 86-740 86-760 86-780
86-701 86-721 86-741 86-761 86-781
86-702 86-722 86-742 86-762 86-782
86-703 86-723 86-743 86-763 86-783
86-704 86-724 86-744 86-764 86-784
86-705 86-725 86-745 86-765 86-785
86-706 86-726 86-746 86-766 86-786
86-707 86-727 86-747 86-767 86-787
86-708 86-728 86-748 86-768 86-788
86-709 86-729 86-749 86-769 86-789
86-710 86-730 86-750 86-770 86-790
86-711 86-731 86-751 86-771 86-791
86-712 86-732 86-752 86-772 86-792
86-713 86-733 86-753 86-773 86-793
86-714 86-734 86-754 86-774 86-794
86-715 86-735 86-755 86-775 86-795
86-716 86-736 86-756 86-776 86-796
86-717 86-737 86-757 86-777 86-797
86-718 86-738 86-758 86-778 86-798
86-719 86-739 86-759 86-779 86-799