Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 154 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 86-nnn – Office Code Pattern 500—599:
This form assigns proper redial pattern to each office code (only within your own area code). This is designed
to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your
own area code. There are three possible settings for calls within your own area code. You must define each
type.
0 = Redial pattern is NXX-XXXX (Local call: 7 Digit)
1 = Redial pattern is 1-NXX-XXXX (Local Toll: 1 + 7 Digit)
2 = Redial pattern is 1-NXX-NXX-XXXX (Local Toll: 1 + 10 Digit)
86-500 86-520 86-540 86-560 86-580
86-501 86-521 86-541 86-561 86-581
86-502 86-522 86-542 86-562 86-582
86-503 86-523 86-543 86-563 86-583
86-504 86-524 86-544 86-564 86-584
86-505 86-525 86-545 86-565 86-585
86-506 86-526 86-546 86-566 86-586
86-507 86-527 86-547 86-567 86-587
86-508 86-528 86-548 86-568 86-588
86-509 86-529 86-549 86-569 86-589
86-510 86-530 86-550 86-570 86-590
86-511 86-531 86-551 86-571 86-591
86-512 86-532 86-552 86-572 86-592
86-513 86-533 86-553 86-573 86-593
86-514 86-534 86-554 86-574 86-594
86-515 86-535 86-555 86-575 86-595
86-516 86-536 86-556 86-576 86-596
86-517 86-537 86-557 86-577 86-597
86-518 86-538 86-558 86-578 86-598
86-519 86-539 86-559 86-579 86-599