Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 152 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 86-nnn – Office Code Pattern 300—399:
This form assigns proper redial pattern to each office code (only within your own area code). This is designed
to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your
own area code. There are three possible settings for calls within your own area code. You must define each
type.
0 = Redial pattern is NXX-XXXX (Local call: 7 Digit)
1 = Redial pattern is 1-NXX-XXXX (Local Toll: 1 + 7 Digit)
2 = Redial pattern is 1-NXX-NXX-XXXX (Local Toll: 1 + 10 Digit)
86-300 86-320 86-340 86-360 86-380
86-301 86-321 86-341 86-361 86-381
86-302 86-322 86-342 86-362 86-382
86-303 86-323 86-343 86-363 86-383
86-304 86-324 86-344 86-364 86-384
86-305 86-325 86-345 86-365 86-385
86-306 86-326 86-346 86-366 86-386
86-307 86-327 86-347 86-367 86-387
86-308 86-328 86-348 86-368 86-388
86-309 86-329 86-349 86-369 86-389
86-310 86-330 86-350 86-370 86-390
86-311 86-331 86-351 86-371 86-391
86-312 86-332 86-352 86-372 86-392
86-313 86-333 86-353 86-373 86-393
86-314 86-334 86-354 86-374 86-394
86-315 86-335 86-355 86-375 86-395
86-316 86-336 86-356 86-376 86-396
86-317 86-337 86-357 86-377 86-397
86-318 86-338 86-358 86-378 86-398
86-319 86-339 86-359 86-379 86-399