Operating instructions

TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual
Page 121
50-ext-01 – Digital Doorphone/ACP Intrusion Alarm:
G1-a10ar
When enabled, this parameter will cause an alarm condition on all stations if the ACP is disconnected or is opened.
Dial [777] from a system console to stop this alarm.
Note: This must be enabled on the DigitalDoorphone/ACP in order to provide the latch alarm. 39-ACP-01
must also be set to a value of 00.
0 = Intrusion Alarm Disabled 1 = Intrusion Alarm Enabled
50-ext-02 – Call Forward Indication:
This function enables or disables indication of call forwarding on the SPK button.
0 = Disable 1 = Enable
50-ext-03 - ISDN Incoming Call Display Type:
This parameter selects what will be displayed on the screen of an LCD phone when an incoming call is received,
either the Caller ID number or the ISDN Indial number. Caller ID on CO lines requires optional equipment to be
installed. This will also select what will be displayed on the SMDR output for incoming calls. This setting also allows
the naming of indials or Caller ID numbers using System Speed Dial Name / numbers. If this setting is a 1 then
when an incoming call with Caller ID or an Indial number rings the TD-824i will search the System Speed dials and
if this number is entered then the name associated with it will be displayed on the screen.
0 = Caller ID / Name 1 = ISDN Indial Number / Name
50-ext-04 CTI-Extension Status Report:
If enabled this parameter will output the extension status report for CTI application.
0 = Disable 1 = Enable
50-ext-05 – Voice Mail Auto Logon Function
0 = EnableVoice Mail Auto Log On String 1 = Disable Voice Mail Auto Log On String
50-ext-06 – ACP/TD-DPU1 Door Lock Relay:
This parameter selects either the ACP/DPU1 relay to be activated or the relay on the MSC card inside the KSU.
0 = Use ACP/DPU1 Relay 1 = Use G1-MSC Relay
(Form 06-00 needs to be set to 2)
50-ext-07 – ACP Door Control Security:
This parameter selects the type of security used for local door relay control.
0 = Use RF Proximity Card OR Password 1 = Use RF Proximity card AND Password
50-ext-08 – ACP Function
0 = Used as a doorphone
1 = Wall Mount Digital Phone
(dial 9 access, intercom calling allowed)