Manualshelf

Operating instructions

ManualsBrandsAcard ManualsComputer AccessoriesACP-2200
111112113114115116117118119120
TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 118 Version 1.3b October 2005
Includes all versions through G1-a20x
46-ext-05 - Maximum Transfer Times:
This feature allows the user or the automatic attendant console to re-transfer the same call for the number of
times set in this parameter.
0 = No Limit 1 = Allow 6 times 2 = Allow 7 times 3 = Allow 8 times
4 = Allow 9 times 5 = Allow 10 times 6 = Allow 11 times 7 = Allow 12 time
8 = Allow 13 times 9 = Allow 14 times
46-ext-06 - Door Unlock/DND/CFWD Access:
0 1 2 3 4 5 6 7
Door
Unlock
Disallow Allow Disallow Allow Disallow Allow Disallow Allow
DND Disallow Disallow Allow Allow Disallow Disallow Allow Allow
CFWD Disallow Disallow Disallow Disallow Allow Allow Allow Allow
46-ext-07 - Call Forward No-Answer to a Pre-assigned Hunting Group (Keysets and Single Line Sets):
This parameter allows Call forward no answer to the pre-assigned hunting group. This parameter will not be
disabled if the user enables or disables the “Personal Call Forward” function, but will be temporarily overridden. If
the user has set the Personal Call Forward to some specified number, system will use “Personal Call Forward”
rule first. When the user disables Personal Call Forward, this option will once again go into effect.
0=Disable 1-9=Forward to Hunt Group 1-9
46-ext-07 – ACP Ring to a Pre-assigned Hunting Group (ACP only):
This parameter determine what station(s) will ring when an ACP doorbell button is pressed. Please note the
difference in ringing assignments when an ACP is connected..
0=Hunt Group 1 1=Hunt Group 2 2=Hunt Group 3
3=Hunt Group 4 4=Hunt Group 5 5=Hunt Group 6
6=Hunt Group 7 7=Hunt Group 8 8=Hunt Group 9
9=Hunt Group 10 d=Use Form 03 (“d”=DND/CN key during system programming)
G1-a10aw
46-ext-08 – Single Line Ringing Type:
G1-a10-ar
Determines the ringing cadence on Single line phones
0 = Ring double ring for Intercom calls and single ring for external (trunk) calls
1 = Single ring – All calls 2 = Double ring – All Calls