Operating instructions

TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual
Page 113
Form 44 continued
44-ext-01 – System Alarm Station:
If disabled, the station will not receive system alarm clock signals
0=Enable 1=Disable
44-ext-02 – Call Hold:
0=Hold is allowed
( SLT Internal Flash)
1=Hold is not allowed
(SLT devices can flash CO)
44-ext-03 – Call Split:
If the setting is disable, the station will not be able to activate call splitting function. When activated and the station
presses hook flash after placing a call on hold the call will not be retrieved. Dialing 9 (or 0) or 72 will retrieve the
held call
0=Call split allowed 1=Call split not allowed
44-ext-04 – Manual Line:
If enabled, this options will cause a station to ring the console group when it
goes off
-
hook.
0=Disable 1=Enable
44-ext-05 – Headset Operation:
If disabled, the code [775] is disabled on the telephone and the headset button will not operate. If enabled, the
headset button will be operative and [775] will also activate and deact
ivate headset operation.
0=Headset Mode Disabled 1=Headset Mode Enabled
44-ext-06 – Default Password (System Programming Access):
If enabled, a station will have access to system programming. If not, the station will be unable to access system
programming.
0=Enable 1=Disable
44-ext-07 – DTMF Receiver Control for Voice mail Ports:
This program controls the operation of DTMF detectors for each Voice mail Port. The parameter is set to free
DTMF detectors quickly for systems with high Voice Mail traffic.
0=After the Voice Mail dials the extension number, The receiver remains online until the timeout of form 05-02-
02.
1=After the Voice Mail dials the extension number, The system releases the DTMF receiver immediately
44-ext-08 – Alarm Signaling Type (SLT and Keysets):
This parameter determines what a station will hear when a station alarm or Wake Up Call is answered.
0=Background Music 1=Busy Tone
44-ext-08 – Transfer Indication Type (Voice Mail extensions only):
G1-a10as
This parameter determines if a transferred call will display the outside caller information or Transfer from ST:xx
(where xx is the extension number of the voice mail port).
0=Display Transfer from ST:xx 1=Display Outside caller information