Operating instructions

TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual
Page 109
If problems are encountered with stations not being able to program speed dial numbers, check this parameter to
be sure that speed dial locations are available to the station. If the station card was installed at the time of system
initialization then the blocks will have been allocated automatically.
Default Information provides the basic two digit default numbering plan for the system.
Numeric allows you to enter the storage Bin Group that you wish to assign for a station to have numeric keypad
speed dialing capability.
DSS permits you to enter a storage Bin Group that you wish to assign for a station to have DSS speed dialing
capability on DSS keys 1 through 10.
Note: Entry of 00 at any location (numeric or DSS) disables speed dialing for that station of the selected
type.
It is possible to assign the same storage Bin Group to more than one station. If more than one station is assigned
the same Bin Group, the stations that share the Bin Group will be able to program the numbers and share the ability
to use them