Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 108 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 42 - Personal Speed Dial Table Assignment:
Default Numerical -01 DSS -02 Default Numerical -01 DSS -02
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
42-___- 42-___-
General:
This program divides sets of Individual Speed Dial into blocks for use by Stations.
Description:
 If in program 05-04-06, the Individual Speed Dial Codes are assigned:
500 sets, the maximum blocks in this program are 50 blocks.
400 sets, the maximum blocks in this program are 40 blocks.
300 sets, the maximum blocks in this program are 30 blocks.
 Each block has 10 sets of Individual Speed Dial.
 Each set has up to 30 digits.
 Each Station can use up to 2 blocks (20 sets of Individual Speed Dial.)
Example:
42-553-IP SPD-T
01 02
13: Station No. ( 2-4 digits )
01 02: Station 553 can use block 01 and 02 for
Individual Speed Dial (20 sets)
42-15-IP SPD-T
04 00
15: Station No. ( 2-4 digits )
04 00: Station 15 can use block 04 (10 sets) for
Individual Speed Dial (00-09), 00 : for no block.
42-550-IP SPD-T
00 03
18: Station No. ( 2-4 digits )
00 03: Station 550 can use block 03 for Individual
Speed Dial (DSS 1-10)
* Refer to Keyphone Operation, for the programming of Individual Speed Dial.
* Be sure to program these parameters before programming speed dial on key phones.