Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 106 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 41 - Station Specifications
Item
Valid
Settings Description Default
41-st-01 1-8 Station Group / Agent Group for UCD 1=1
41-st-02 1-8 Key Group For KeyPhone 2=2
41-st-03 1-8 Shift Key Group For KeyPhone 0=None
41-st-04 1-8 Dial 9 trunk group 1=1
41-st-05 0-9 Toll plan - Day 0=0
41-st-06 0-9 Toll plan - Night 0=0
41-st-07 cn c = Card number, n = Port number
41-STN-01 – Group Assignment:
Zone Paging - Pick Up Group Station Group - Single Digit Dialing Group
1-8 = Valid Group Entries
41-STN-02 – Flexible Key Group (EKT):
(This parameter assigns stations to one of 8 flexible key pattern
groups.)
1-8 = Applicable Key Group From Form 07
41-STN-03 - SHIFT Key Group (EKT):
Each station can have access to a second soft key group accessed by the [SHIFT] key (refer to mode 07). The
shift key must be programmed in the first group assigned to the station. When the shift key is used to access the
second group then it will light red and override the function assigned to it in the second group.
0 = Disabled 1-8 = Applicable Key Group From Form 07.
41-STN-04 - Dial 9 Group:
When a station selects a trunk line by dialing 9, the system finds an available trunk according to the dial 9 group
assignment. If a trunk is not in a stations assigned dial 9 group then the station will not be able to make outgoing
calls on that trunk.
1-8 = Applicable Dial 9 Group From Form 36
41-STN-05 - Toll Plan (Day Service):
This parameter assigns the toll plan to be used by the station in day mode.
Refer to Form 18 for Toll plan details.
0-9 = Applicable Toll Plan
41-STN-06 - Toll Plan (Night Service):
This parameter assigns the toll plan to be used by the station in night mode.
Refer to Form 18 for Toll plan details
0-9 = Applicable Toll Plan