Operating instructions

TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual
Page 100 Version 1.3b October 2005
Includes all versions through G1-a20x
Form 36 - CO Line Groups (Dial 9 Groups):
Line - 01 02 03 04 05 06 07 08
36 01
36-02
36-03
36-04
36-05
36-06
36-07
36-08
General:
This program permits each trunk line to be assigned to different Trunk groups. There are eight groups in total.
This parameter will work with the following features:
. Dial 9 (or 0) access to trunk group.
. Tenant service
Note: Each line group may contain up to eight CO lines.
A line may be programmed in any number of Groups.
Note: LCD Displays on TD-824i show 10 possible lines. Systems sold within North America currently
support only 8 CO lines.
Form 37 - Busy Out CO Trunk:
This program permits the trunk line to be locked (busy out) by a Technician. This feature is used when the user
does not want to use the trunk or to remove a problem line. When the trunk is set to BUSY OUT, the LCD display
on the phone will display " Access denied " when that line button is pressed.
37-tk Busy Out
0000000000
tk = 01-10
Busy out Type
0 = Line is unlocked
1 = Busy for Outgoing calls
2 = Busy for Incoming and Outgoing calls (set line LED off)
3 = Busy for Incoming and Outgoing calls (set line LED on)
Note: LCD Displays on TD-824i show 10 possible lines. Systems sold within North America currently
support only 8 CO lines.