Installation guide

Configuring a SIP Trunk to an Avaya CM
Acano solution: Deployment Guide R1.2 76-1006-06-K
Page 79
6. Click Add New.
Avaya CM Configuration
1. Add a node name for the Acano signaling interface.
2. Add an Avaya Signaling Group with the following:
 Group Type = SIP
 Near-end Node Name = C-LAN or Processor Ethernet interface indicated in the dial plan
setting in the previous section
 Far-end Node Name = Node name for the Acano signaling interface created above.
 Port settings for both Near-end and Far-end = 5060
 Far-end Domain = SIP domain associated with the Acano Server
 Direct IP-IP Audio Connections = n. This ensures that all traffic from the Avaya CM
comes from the Near-end Node