Installation guide

Web Admin Interface Settings for the TURN Server
Acano solution: Deployment Guide R1.2 76-1006-06-K
Page 56
10 Web Admin Interface Settings for the TURN
Server
This section explains how to set up the TURN server in the Web Admin Interface so that Call
Bridge can communicate with it. The TURN server allows you to use the built-in firewall traversal
technology when traversing a firewall or NAT.
Follow the instructions below in the order provided at any time after the initial Acano solution
configuration has been completed.
10.1 Network Topology
Figure 14: Example network topology showing TURN Server