Installation guide

Web Admin Interface Settings for the Web Bridge
Acano solution: Deployment Guide R1.2 76-1006-06-K
Page 54
Figure 13: WebRTC Client port usage
Note: * Although the port range between the TURN server and the External clients is shown as
32768-65535, currently only 50000-51000 is used. The required range is likely to be larger in
future releases.
9.2 Web Bridge Settings
Follow the steps in order.
1. Ensure that you have installed the Web Bridge certificate and license.
2. Ensure that you have configured the Web Bridge.
3. Sign in to the Web Admin Interface and configure the Acano solution as follows:
 Go to Configuration > General.
 Set the following where:
 Guest Account Client URI = The URI including https:// to reach the guest account;
for example, https://join.example.com
 Guest Account JID Domain = guest account JID, e.g. example.com
4. Open a web browser and go to https://join.example.com to test the configuration.
Guest users selecting the general configured web link will see a landing page in which they
can enter the call ID to join a call.